Cart

Your Cart is Empty

Customer Reviews

Based on 17 reviews
94%
(16)
0%
(0)
6%
(1)
0%
(0)
0%
(0)
A
A.F.
Easy to fit

All holes pre-drilled and everything lined up perfectly-took a couple of minutes to fit.. easy

M
M.H.
Mounted frame to a set of hard panniers

I bought an extra set of frames to mount on a separate set of hard panniers to allow easy switching between hard and soft bags. The frames work great and make it easy to swap based on needs.

S
S.B.
35l Backcountry Pannier & Mounting Frame

This past Thanksgiving I was looking to add a 35l pannier to have a symmetrical mounting for a recent bike acquisition, but the individual bag was out of stock. Roel Bremmer put together a special order for me with all the parts I needed and I was even able to get in on the sale! Great customer service.
The high quality parts arrived in great shape and assembly was straightforward. Earlier this year during an MABDR ride I experienced a low side at about 30 mph in the dirt. I can attest that these bags are tough! The bike suffered bent engine guards and some broken plastic, but the bags came through unscathed. These panniers are a great addition to any off-road adventure. Lots of capacity, durable, safer for the rider in the event of a fall, and kept all my gear dry and secure.

B
B.D.
Using additional pannier with the Mosko Mounting frame.

My Mosko 35l Back Country panniers are great. Using them with Happy Trails pannier racks. I have a smaller set of panniers I made a few years ago using Pelican 1450 cases. I like these for shorter trips. I purchased two of the Mosko pannier-side mounting frames, installed them onto my Pelican-derived panniers, and they fit great. Gives me lots more flexibility. I would guess the frames would work on a variety of different panniers. Great product.

R
R.M.
Replacement Mounting Frame

I ride my bike hard and over very rocky terrain. I had broken two Mounting Frames on a ride a few weeks ago. I contacted Mosko and they shipped out replacements immediately. Fantastic customer service and product.

Backcountry Pannier Mounting Frame (Single)

This Glass-Filled Nylon mounting frame is great for setting up a second bike, or replacing a damaged part. Sold Individually. Hardware included to mount frame to bag.

Available with either the current Speed-Pin or older rotary draw latch preinstalled. Be sure to select the latch style that matches your existing wedge. Wedge not included.

NOTE: The older style HDPE mounts (pre-July 2016) are not compatible with the current glass-filled nylon frame and wedge parts. We no longer stock replacement HDPE parts, so it's time to upgrade your panniers with a Retrofit Kit. It's much stronger, and you will love the Speed-Pin latch system! Not sure which style you have? Check for the molded 'honeycomb pattern' pictured below. The HDPE mounts didn't have it.

Latch Style

Customer Reviews

Based on 17 reviews
94%
(16)
0%
(0)
6%
(1)
0%
(0)
0%
(0)
A
A.F.
Easy to fit

All holes pre-drilled and everything lined up perfectly-took a couple of minutes to fit.. easy

M
M.H.
Mounted frame to a set of hard panniers

I bought an extra set of frames to mount on a separate set of hard panniers to allow easy switching between hard and soft bags. The frames work great and make it easy to swap based on needs.

S
S.B.
35l Backcountry Pannier & Mounting Frame

This past Thanksgiving I was looking to add a 35l pannier to have a symmetrical mounting for a recent bike acquisition, but the individual bag was out of stock. Roel Bremmer put together a special order for me with all the parts I needed and I was even able to get in on the sale! Great customer service.
The high quality parts arrived in great shape and assembly was straightforward. Earlier this year during an MABDR ride I experienced a low side at about 30 mph in the dirt. I can attest that these bags are tough! The bike suffered bent engine guards and some broken plastic, but the bags came through unscathed. These panniers are a great addition to any off-road adventure. Lots of capacity, durable, safer for the rider in the event of a fall, and kept all my gear dry and secure.

B
B.D.
Using additional pannier with the Mosko Mounting frame.

My Mosko 35l Back Country panniers are great. Using them with Happy Trails pannier racks. I have a smaller set of panniers I made a few years ago using Pelican 1450 cases. I like these for shorter trips. I purchased two of the Mosko pannier-side mounting frames, installed them onto my Pelican-derived panniers, and they fit great. Gives me lots more flexibility. I would guess the frames would work on a variety of different panniers. Great product.

R
R.M.
Replacement Mounting Frame

I ride my bike hard and over very rocky terrain. I had broken two Mounting Frames on a ride a few weeks ago. I contacted Mosko and they shipped out replacements immediately. Fantastic customer service and product.

Warranty and Crash Replacement

We offer an industry-leading limited lifetime warranty on all our sewn seam bags, and a two year warranty on welded seam bags. Contact us for discounted crash replacement pricing.

Learn More

Follow Our Tracks